FixVault
Home › Mazda › 2006 › B3000 Base, Automatic › Repair and Diagnosis › Body & Frame › Windows › Glass/Windows/Mirrors › Passenger Power Window Switch Inspection

Passenger Power Window Switch Inspection

  1. Remove the passenger power window switch.
  2. Inspect for continuity between the passenger power window switch terminals using an ohmmeter.
    Fig 1: Inspecting Passenger Power Window Switch
    G04310256Courtesy of MAZDA MOTORS CORP.

    Inspection 

    INSPECTION CHART

    Circuit to test Connect self-powered test light or ohmmeter to terminals Move switch to these positions A good switch will indicate
    Window adjust switch 3 and 5 2 and 1 Up Closed circuit
    3 and 1 4 and 5 Down Closed circuit
    4 and 5 2 and 1 Off Closed circuit
  3. If not as specified, replace the passenger power window switch.
About FixVault