Side Protector Installation

Remove the adhesive remaining on the side protector (if it will be reused) and the body using a razor.
Remove any grease or dirt from the adhesion surface of the side protector (if it will be reused) and the body.
Attach double-sided adhesive tape to the side protector as shown (if it will be reused).
Clearance
1. 7.0-9.0 mm {0.28-0.35 in}
2. 34.0-36.0 mm {1.34-1.41 in}
3. 1.0-3.0 mm {0.04-0.11 in}
4. 6.0 mm {0.24 in}
5. 1.0-3.0 mm {0.04-0.11 In}
6. 37.0-39.0 mm {1.46-1.53 in}
7. 0.0-2.0 mm {0.0-0.07 in}
Fig 1: Removing Adhesive Remaining On Side Protector
Courtesy of MAZDA MOTORS CORP.
Peel off the backing paper from the double-sided adhesive tape and attach the side protector onto the body as shown.
Clearance
1. 1.0-4.0 mm {0.04-0.15 in}
2. 1.0-4.0 mm {0.04-0.15 in}
3. 100 mm {3.94 in}
4. 200 mm {7.84 in}
5. 284.1 mm {11.19 in}
6. 308.1 mm {12.13 in}
  
  Fig 2: Peeling Off Backing Paper From Double-Sided Adhesive Tape
  Courtesy of MAZDA MOTORS CORP.