Engine Valves & Valve Springs Specifications
WARNING: This page is about a different car, the 2001 Mazda MPV and 2000 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
VALVES & VALVE SPRINGS
| Application | Specification | |||
|---|---|---|---|---|
| Intake Valves | ||||
| Face Angle | 45° | |||
| Head Diameter | (1) | |||
| Minimum Margin | (1) | |||
| Minimum Refinish Length | (1) | |||
| Stem Diameter | .2352-.2360" (5.975-5.995 mm) | |||
| Valve Tip Maximum Refinish | (1) | |||
| Exhaust Valves | ||||
| Face Angle | 45° | |||
| Head Diameter | (1) | |||
| Minimum Margin | (1) | |||
| Minimum Refinish Length | (1) | |||
| Stem Diameter | .2343-.2350" (5.950-5.970) | |||
| Valve Tip Maximum Refinish | (1) | |||
| Valve Springs | ||||
| Free Length | (1) | |||
| Installed Height | (1) | |||
| Out-Of-Square | .00184 (.468) | |||
| Lbs.@ In. (kg @ mm) | ||||
| Compressed Length | 152 @ 1.189 (69.3 @ 30.19) | |||
|
||||