Seat Weight Sensor Inspection [Two-Step Deployment Control System]

CAUTION:

• If any of the following work is performed, perform the seat weight sensor inspection using the WDS or equivalent.
  • Removal of the passenger-side seat
  • Loosening and retightening of passenger's seat fixing bolts
  • Or, the vehicle is involved in a collision
• If any of the following work is performed, perform the seat weight sensor calibration using the WDS or equivalent. (See SEAT WEIGHT SENSOR CALIBRATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .)
  • Replacement with a new seat weight sensor
  • Replacement with a new seat weight sensor control module
  • Replacement with new passenger-side seat parts
  • Disassembly of the passenger-side seat

1. Connect the WDS or equivalent to the DLC-2 (16-pin).
2. Select "Body" from the menu.
3. Select "Restraints".
4. Select "Seat Weight Sensor ReZero Procedure".
5. Perform inspection following the procedures on the WDS or equivalent screen.

Fig 1: Locating DLC-2 Connector

Courtesy of MAZDA MOTORS CORP.