FixVault

Coil Antenna Removal/Installation [With Advanced Keyless System]: Notes

NOTE:
  • Do not remove the coil antenna unless you are replacing it.
  • When only the coil antenna is replaced, the immobilizer system reprogram procedure is not necessary.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Remove the column cover.
  3. Remove in the order indicated in Fig 1 .
    Fig 1: Removing/Installing Coil Antenna
    G04323557Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.