FixVault
Home › Mazda › 2006 › MX-5 Miata Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Clutch Pedal Position (CPP) Switch Inspection › Continuity Inspection

Continuity Inspection

  1. Remove the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION .)
  2. Verify that the continuity between CPP switch terminals D and B is as indicated in Fig 1 .
    • If not as indicated in Fig 1 , replace the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION .)
      • Fig 1: Clutch Pedal Position Switch Continuity Table
      G04323019Courtesy of MAZDA MOTORS CORP.
    • If the monitor item condition/specification (reference) is not within the specification, even though there is no malfunction, perform the CIRCUIT OPEN/SHORT INSPECTION  .
About FixVault