FixVault
Home › Mazda › 2006 › MX-5 Miata Base › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Steering Gear And Linkage Disassembly › Holder Disassembly Note

Holder Disassembly Note

  1. Remove the crimp from the holder and cylinder ends using a hacksaw.
    Fig 1: Removing Crimp From Holder & Cylinder Ends Using Hacksaw
    G04318788Courtesy of MAZDA MOTORS CORP.
  2. Remove the holder using the SST  .
    Fig 2: Removing Holder Using SST
    G04318789Courtesy of MAZDA MOTORS CORP.
About FixVault