FixVault
Home › Mazda › 2007 › 3 Mazdaspeed, 2.3 L › Repair and Diagnosis › External Pages › Different car › Section 609 (Security System And Locks System (Advanced Keyless System)) › Keyless Antenna Removal/Installation[Advanced Keyless System] › Driver-side/passenger-side Door

Driver-side/passenger-side Door

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Remove the door trim. (See DOOR TRIM REMOVAL/INSTALLATION .)
  3. Remove the screws.
  4. Disconnect the connector, then remove the keyless antenna.
  5. Install in the reverse order of removal.
Fig 1: Identifying Keyless Antenna Remove/Install Components (Door)
G04931352Courtesy of MAZDA MOTORS CORP.
About FixVault