FixVault
Home › Mazda › 2007 › 3 Mazdaspeed, 2.3 M › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Hood Latch And Release Lever Removal/Installation › Notes

Hood Latch And Release Lever Removal/Installation: Notes

  1. To remove the hood release cable, remove the following parts:
    1. Battery (See BATTERY REMOVAL/INSTALLATION [LF, L3] .)
    2. Fresh-air duct (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION [LF, L3] .)
  2. Remove in the order indicated in the table.
  3. Install in the reverse order of removal.
  4. Adjust the hood. (See HOOD ADJUSTMENT .)
    Fig 1: Identifying Hood Latch And Release Lever Components
    G04956856Courtesy of MAZDA MOTORS CORP.
About FixVault