FixVault
Home › Mazda › 2007 › 3 Mazdaspeed, 2.3 M › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Liftgate Lock Striker Removal/Installation

Liftgate Lock Striker Removal/Installation

  1. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  2. Remove the bolts, then remove the liftgate lock striker.
  3. Install in the reverse order of removal.
  4. Adjust the liftgate. (See LIFTGATE ADJUSTMENT .) BOLT
    Fig 1: Liftgate Lock Striker & Torque Specification
    G04956848Courtesy of MAZDA MOTORS CORP.
About FixVault