FixVault
Home › Mazda › 2007 › 3 Mazdaspeed, 2.3 M › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Trunk Lid Latch Removal/Installation

Trunk Lid Latch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
  3. Detach the rod from the trunk lid key cylinder.
  4. Disconnect the trunk lid latch switch connector.
  5. Remove the bolts, then remove the trunk lid latch and opener.
  6. Install in the reverse order of removal.
  7. Adjust the trunk lid. (See TRUNK LID ADJUSTMENT .)
    Fig 1: Trunk Lid Latch & Torque Specification
    G04956872Courtesy of MAZDA MOTORS CORP.
About FixVault