DTC P2126: Notes

DTC P2126 (LF, L3) DETECTION CONDITION AND POSSIBLE CAUSES

DTC P2126

Accelerator pedal position (APP) sensor No. 2 range/performance problem

DETECTION CONDITION

The PCM monitors the APP sensor duty signal. If the input signal (duty signal) is too high or too low than the set value, or the input signal intervals are too short or too long, the PCM determines that the APP sensor No. 2 has a malfunction.

Diagnostic support note

This is a continuous monitor (CCM).
The MIL illuminates if the PCM detects the above malfunction condition in the first drive cycle.
PENDING CODE is available if the PCM detects the above malfunction condition.
FREEZE FRAME DATA is available.
The DTC is stored in the PCM memory.

POSSIBLE CAUSE

APP sensor No. 2 malfunction
PCM malfunction