DTC P2229: Notes
DTC P2229 (LF, L3) DETECTION CONDITION AND POSSIBLE CAUSES
| DTC P2229 |
BARO sensor circuit high input |
| DETECTION CONDITION |
- The PCM monitors input voltage from BARO sensor into the PCM. If input voltage is above 4.0 V , 4.45 V
, PCM determines that BARO sensor circuit has malfunction.
Diagnostic support note
- This is a continuous monitor (CCM).
- The MIL illuminates if PCM detects the above malfunction condition during first drive cycle.
- PENDING CODE is available if PCM detects the above malfunction condition.
- FREEZE FRAME DATA is available.
- DTC is stored in PCM memory.
|
| POSSIBLE CAUSE |
- BARO sensor malfunction
- PCM malfunction
|