FixVault
Home › Mazda › 2007 › 3 i, 2.0 F, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 6 (Engine Control System (L3 With TC)) › Variable Swirl Shutter Valve Switch Inspection › Circuit Open/Short Inspection › Notes

Circuit Open/Short Inspection: Notes

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Variable Swirl Shutter Valve Switch Connector Terminals
G04859794Courtesy of MAZDA MOTORS CORP.
Fig 2: PCM Connector Terminal Identification
G04859793Courtesy of MAZDA MOTORS CORP.
  1. Disconnect the PCM connector. (See PCM REMOVAL/INSTALLATION ).
  2. Inspect the following harnesses for an open or short circuit. (Continuity check)
About FixVault