FixVault
Home › Mazda › 2007 › 6 Mazdaspeed › Repair and Diagnosis › Brakes › Traction Control › On-Board Diagnostic (Dynamic Stability Control) › DSC On-Board Diagnosis › PID/DATA Monitor Table

PID/DATA Monitor Table

PID/DATA MONITOR CHART

PID Name (Definition) Unit/Condition Condition/Specification Action DSC HU/CM terminal
ABS_LAMP
(ABS warning light driver output state)		 On/Off
  • ABS warning light is illuminated: ON
  • ABS warning light is not illuminated: Off
 Inspect ABS warning light. -
ABSLF_I
(Left front ABS pressure retention solenoid valve output state)		 On/Off
  • During ABS control: On/Off (solenoid valve is activated/deactivated)
  • Not ABS control: Off (solenoid valve is deactivated)
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
ABSLF_O
(Left front ABS pressure reduction solenoid valve output state)		 On/Off
  • During ABS control: On/Off (solenoid valve is activated/deactivated)
  • Not ABS control: Off (solenoid valve is deactivated)
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
ABSLR_I
(Left rear ABS pressure retention solenoid valve output state)		 On/Off
  • During ABS or EBD control: On/Off (solenoid valve is activated/deactivated)
  • Not ABS and EBD control: Off (solenoid valve is deactivated)
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
ABSLR_O
(Left rear ABS pressure reduction solenoid valve output state)		 On/Off
  • During ABS or EBD control: On/Off (solenoid valve is activated/deactivated)
  • Not ABS and EBD control: Off (solenoid valve is deactivated)
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
ABSRF_I
(Right front ABS pressure retention solenoid valve output state)		 On/Off
  • During ABS control: On/Off (solenoid valve is activated/deactivated)
  • Not ABS control: Off (solenoid valve is deactivated)
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
ABSRF_O
(Right front ABS pressure reduction solenoid valve output state)		 On/Off
  • During ABS control: On/Off (solenoid valve is activated/deactivated)
  • Not ABS control: Off (solenoid valve is deactivated)
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
ABSRR_I
(Right rear ABS pressure reduction solenoid valve output state)		 On/Off
  • During ABS control: On/Off (solenoid valve is activated/deactivated)
  • Not ABS control: Off (solenoid valve is deactivated)
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
ABSRR_O
(Right rear ABS pressure reduction solenoid valve output state)		 On/Off
  • During ABS control: On/Off (solenoid valve is activated/deactivated)
  • Not ABS control: Off (solenoid valve is deactivated)
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
ABSPMPRLY
(Motor relay output state)		 On/Off
  • Motor relay is activated: On
  • Motor relay is deactivated: Off
 Inspect DSC HU/CM.
(See DSC HU/CM INSPECTION ).		 -
ABSVLVRLY
(Fail-safe relay output state)		 On/Off
  • Fail-safe relay is activated: On
  • Fail-safe relay is deactivated: Off
 Inspect DSC HU/CM.
(See DSC HU/CM INSPECTION ).		 -
ABS_VOLT
(System battery voltage value)		 V
  • Ignition key at ON: B+ 
  • Idle: Approx. 14-16 V 
 Inspect power supply circuit.
(See DSC HU/CM INSPECTION ).		 G
ACCLMTR
(Forward-G sensor input)		 G
  • Vehicle is stopped or driving at a constant speed: 0 G 
  • Cornering to left: Changes between 0 G and 1.5 G 
  • Cornering to right: Changes between 0 G and - 1.5 G 
 Inspect combined sensor.
(See COMBINED SENSOR INSPECTION ).		 V
AWD_MSG
(Missing message from the AWD control module)		 Present/Not Present
  • Present: Circuit in the AWD control module is normal.
  • Not Present: Circuit in the AWD control module is abnormal.
 Inspect AWD control module.
(See AWD CONTROL MODULE INSPECTION )
Inspect DSC HU/CM.
(See DSC HU/CM INSPECTION )		 -
BOO_ABS
(Brake pedal switch input)		 On/Off
  • Brake pedal is depressed: On
  • Brake pedal is released: Off
 Inspect brake switch.
(See BRAKE SWITCH INSPECTION ).		 -
BRK_FLUID
(Brake fluid level sensor input)		 OK/Low
  • Brake fluid is above LOW: OK
  • Brake fluid is below LOW: Low
 Inspect brake fluid level. Inspect brake fluid level sensor.
(See BRAKE FLUID LEVEL SENSOR INSPECTION ).		 -
BRAKE_LMP
(BRAKE system warning light output state)		 On/Off
  • BRAKE system warning light is illuminated: On
  • BRAKE system warning light is not illuminated: Off
 Inspect BRAKE system warning light. -
CCNTABS
(Number of continuous codes)		 - DTC is detected: 1-255
DTC is not detected: 0		 Perform inspection using appropriate DTC. -
IC_MSG
(Missing message from the instrument cluster)		 Present/Not Present
  • Present: Circuit in the instrument cluster is normal.
  • Not Present: Circuit in the instrument cluster is abnormal.
 Inspect instrument cluster.
(See INSTRUMENT CLUSTER INSPECTION )
Inspect DSC HU/CM.
(See DSC HU/CM INSPECTION )		 -
LAT_ACCL
(Lateral-G sensor input)		 G
  • Vehicle is stopped or driving straight: 0 G
  • Cornering to left: Changes between 0 G and 1.5 G 
  • Cornering to right: Changes between 0 G and - 1.5G 
 Inspect combined sensor.
(See COMBINED SENSOR INSPECTION ).		 O
L_DSC_O
(Stability control solenoid valve (LF-RR))		 On/Off
  • Solenoid valve is activated: On
  • Solenoid valve is deactivated: Off
 Internal fault of DSC HU/CM. Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
LF_WSPD
(Left front ABS wheel-speed sensor input)		 KPH, MPH
  • Vehicle is stopped: 0 KPH {0 MPH} 
  • Vehicle is driving: Indicates vehicle speed
 Inspect ABS wheel-speed sensor/sensor rotor.
(See FRONT/REAR ABS WHEEL-SPEED SENSOR INSPECTION ).		 F, J
LR_WSPD (Left rear ABS wheel-speed sensor input) KPH, MPH
  • Vehicle is stopped: 0 KPH {0 MPH} 
  • Vehicle is driving: Indicates vehicle speed
 Inspect ABS wheel-speed sensor/sensor rotor.
(See FRONT/REAR ABS WHEEL-SPEED SENSOR INSPECTION ).		 N, Q
MCYLI P
(Brake fluid pressure sensor input)		 Pa
  • Brake pedal is released: 0 Pa 
  • Brake pedal is depressed: Changes between 0 Pa and 25.5 MPa 
 Inspect DSC HU/CM.
(See DSC HU/CM INSPECTION ).		 -
PCM_MSG
(Missing message from the PCM)		 Present/Not Present
  • Present: Circuit in the PCM is normal.
  • Not Present: Circuit in the PCM is abnormal.
 Inspect PCM.
(See PCM INSPECTION [L3 WITH TC] ).
Inspect DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
PMPSTAT
(Pump motor output state)		 On/Off
  • Pump motor activate: On
  • Pump motor not activate: Off
 Internal fault of DSC HU/CM.
Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
R_DSC_O
(Stability control solenoid valve (RF-LR))		 On/Off
  • Solenoid valve is activated: On
  • Solenoid valve is deactivated: Off
 Internal fault of DSC HU/CM.
Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
RF_WSPD
(Right front ABS wheel-speed sensor input)		 KPH, MPH
  • Vehicle is stopped: 0 KPH {0 MPH} 
  • Vehicle is driving: Indicates vehicle speed
 Inspect ABS wheel-speed sensor/sensor rotor.
(See FRONT/REAR ABS WHEEL-SPEED SENSOR INSPECTION ).		 I, M
RPM
(Engine speed signal input)		 RPM
  • Engine is stopped: 0 RPM 
  • Engine is running: Indicates engine speed
 Inspect PCM.
(See PCM INSPECTION [L3 WITH TC] ).		 -
RR_WSPD
(Right rear ABS wheel-speed sensor input)		 KPH, MPH
  • Vehicle is stopped: 0 KPH {0 MPH} 
  • Vehicle is driving: Indicates vehicle speed
 Inspect ABS wheel-speed sensor/sensor rotor.
(See FRONT/REAR ABS WHEEL-SPEED SENSOR INSPECTION ).		 H, K
SWA_POS
(Steering angle sensor input)		 °
  • Steering wheel is in neutral position: 0  °
  • Steering wheel is turned to left: Changes between 0  ° and-1,640  °
  • Steering wheel is turned to right: Changes between 0  ° and 1,640  °
 Inspect steering angle sensor.
(See STEERING ANGLE SENSOR INSPECTION ).		 R, U, W, X
TC LVAL
(Traction switch solenoid valve (LF-RR))		 On/Off
  • Solenoid valve is activated: On
  • Solenoid valve is deactivated: Off
 Internal fault of DSC HU/CM.
Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
TC RVAL
(Traction switch solenoid valve (RF-LR))		 On/Off
  • Solenoid valve is activated: On
  • Solenoid valve is deactivated: Off
 Internal fault of DSC HU/CM.
Replace DSC HU/CM.
(See DSC HU/CM REMOVAL/INSTALLATION ).		 -
TPI
(Throttle position signal input)		 %
  • Closed throttle position: 0% 
  • Wide open throttle: Changes between 0% and 100% 
 Inspect PCM and throttle position sensor.
(See PCM INSPECTION [L3 WITH TC] ).
(See THROTTLE POSITION (TP) SENSOR INSPECTION [L3 WITH TC] ).		 -
TRAC_SW
(DSC OFF switch input)		 On/Off
  • DSC OFF switch is depressed: On
  • DSC OFF switch is released: Off
 Inspect DSC OFF switch.
(See DSC OFF SWITCH INSPECTION ).		 AA
TRANSGR
(Transaxle gear position input)		 1/2/3/4/5/6/R/N/Error
  • Transaxle gear/selector lever position(1)

    1GR: 1

    2GR: 2

    3GR: 3

    4GR: 4

    5GR: 5

    6GR: 6

    Reverse: R

    Neutral: N

    When gear position estimation is disabled:

    Error

 Inspect PCM.
(See PCM INSPECTION [L3 WITH TC] ).		 -
YAW_RATE
(Yaw rate sensor input)		 °/s
  • Vehicle is stopped or driving straight: 0 °/s 
  • Cornering to left: Changes between 0 °/s and 150 °/s 
  • Cornering to right: Changes between 0 °/s and -150 °/s 
 Inspect combined sensor.
(See COMBINED SENSOR INSPECTION ).		 T
(1) The displayed gear position is an estimated value based on the vehicle wheel speed and engine speed

Active Command Modes Table 

ACTIVE COMMAND MODES CHART

Command Name Definition Operation Note
ABS_POWER Fail-safe relay On/Off Ignition key at ON (Engine OFF), and driving
LATACCEL Lateral-G sensor initialization TRUE/FALSE
LF_DSC_V Stability control solenoid valve (LF-RR) On/Off
LF_INLET Left front ABS pressure retention solenoid valve On/Off
LF_OUTLET Left front ABS pressure reduction solenoid valve On/Off
LF_TC_VLV Traction switch solenoid valve (LF-RR) On/Off
LR_INLET Left rear ABS pressure retention solenoid valve On/Off
LR_OUTLET Left rear ABS pressure reduction solenoid valve On/Off
PMP_MOTOR ABS motor On/Off
RF_DSC_V Stability control solenoid valve-(RF-LR) On/Off
RF_INLET Right front ABS pressure retention solenoid valve On/Off
RF_OUTLET Right front ABS pressure reduction solenoid valve On/Off
RF_TC_VLV Traction switch solenoid valve (RF-LR) On/Off
RR_INLET Right rear ABS pressure retention solenoid valve On/Off
RR_OUTLET Right rear ABS pressure reduction solenoid valve On/Off
STAB_IND DSC indicator light On/Off
TRAC OFF DSC OFF light On/Off
YAWRATE Yaw rate sensor initialization On/Off
About FixVault