Fuel Pump Resistor Removal/Installation

Disconnect the negative battery cable. See BATTERY REMOVAL/INSTALLATION [L3 WITH TC] .
Remove the air cleaner. See INTAKE AIR SYSTEM REMOVAL/INSTALLATION .
Disconnect the fuel pump resistor connector.
Remove in the fuel pump resistor.

Fig 1: Disconnecting Fuel Pump Resistor Connector
Courtesy of MAZDA MOTORS CORP.
Install in the order as shown in the figure.
Tightening torque

4.2-6.2 N.m {43-63 kgf.cm, 38-54 in.lbf}
Connect the fuel pump resistor connector.

Fig 2: Connecting Fuel Pump Resistor Connector
Courtesy of MAZDA MOTORS CORP.