After Repair Procedure

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Connect the M-MDS to DLC-2

Fig 1: Locating DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- When using the IDS (laptop PC)
  1. Select the "Toolbox"tab.
  2. Select "DataLogger".
  3. Select "Modules".
  4. Select "PCM".
  5. Select "Retrieve CMDTCs".
- When using the PDS (Pocket PC)
  1. Select "Module Tests".
  2. Select "PCM".
  3. Select "DataLogger".
  4. Select "Retrieve CMDTCs".
Verify the DTC according to the directions on the M-MDS screen.
Press the clear button on the DTC screen to clear the DTC.
Verify that no DTCs are displayed.