Starter Installation Note

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If there is peeling on or damage to the insulator, attach a new insulator using the following procedure:

Peel off the insulator from the starter completely using a scraper.

Fig 1: Identifying Starter Insulator
Degrease the insulator attachment area.

Fig 2: Identifying Insulator Attachment Area
Attach a new insulator to the starter.

Fig 3: Identifying New Starter Insulator