Upper Spring Seat Installation Note

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Align the mark on the upper spring seat with the dust boot projection.

Fig 1: Aligning Mark On Upper Spring Seat With Dust Boot Projection
Courtesy of MAZDA MOTORS CORP.
Install the upper spring seat so that the upper spring seat stud is at a 27°-33° angle to the shock absorber installation shaft (lower side).

Fig 2: Identifying Upper Spring Seat Stud Angle
Courtesy of MAZDA MOTORS CORP.