Interior Light Removal/Installation

WARNING: This page is about a different car, the 2007 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the direction shown by the arrow to remove the lens.

Fig 1: View Of Interior Light Lens
Courtesy of MAZDA MOTORS CORP.
Insert a tape-wrapped flathead screwdriver into the gap between the headliner and the interior light.

Fig 2: View Of Interior Light
Courtesy of MAZDA MOTORS CORP.
Press the tab and remove the interior light.
Disconnect the interior light connector.
Install in the reverse order of removal.

Fig 3: Identifying Interior Light Connector
Courtesy of MAZDA MOTORS CORP.