Adjusting Cover Assembly Note
WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Apply sealant to the threads of the adjusting cover.
- Using the SST
, tighten the adjusting cover with a tightening torque of 20.0 N.m {2.0 kgf.m, 14.8 ft.lbf}
.
- Using the SST
, loosen the adjusting cover to 25-30°
.
Courtesy of MAZDA MOTORS CORP.