FixVault
Home › Mazda › 2007 › 6 Mazdaspeed › Repair and Diagnosis › External Pages › Different car › Section 746 (Glass/Windows/Mirrors) › Front Manual Window Regulator Removal/Installation

Front Manual Window Regulator Removal/Installation

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
    2. Regulator handle (See REGULATOR HANDLE REMOVAL ).
    3. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
    4. Front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
    5. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION ).
  3. Remove the nuts and the bolts.
    Fig 1: Window Regulator & Torque Specification
    G04956717Courtesy of MAZDA MOTORS CORP.
  4. Remove the front manual window regulator through the speaker installation hole.
  5. Install in the reverse order of removal.
    Fig 2: Identifying Front Manual Window Regulator
    G04956718Courtesy of MAZDA MOTORS CORP.
About FixVault