FixVault
Home › Mazda › 2007 › 6 Mazdaspeed › Repair and Diagnosis › External Pages › Different car › Section 746 (Glass/Windows/Mirrors) › Power Window Motor Connector

Power Window Motor Connector

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply battery positive voltage and connect ground to power window motor terminals E and F, and then inspect the power window motor operation.
    • If the power window motor does not operate as indicated in the table, replace it.
    POWER WINDOW MOTOR OPERATION

    Operation Terminal
    Front: F
    Rear: E    		 Front: E
    Rear: F
    Open GND B+
    Closed B+ GND
    Fig 1: Checking Power Window Motor Operation
    G04956727Courtesy of MAZDA MOTORS CORP.
About FixVault