Front Lower Arm Installation Note
WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Install the front lower arm according to the following procedures for optimal installation. Tighten the lower arm installation bolt properly when the vehicle is lifted.
- Temporarily install the front lower arm.
- Install the No.1 engine mount.
Tightening torque
93.1-116.6 N.m {9.50-11.88 kgf.m, 68.67-85.99 ft.lbf}
- Tighten the front lower arm rear side bolt.
- Tighten the front lower arm front side bolt.
- Tighten the nut (front lower arm ball joint).