Stabilizer Bushing Installation Note

WARNING: This page is about a different car, the 2008 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Verify the installation direction of the stabilizer bushing.

Fig 1: Inspecting Installation Direction Of Stabilizer Bushing
Courtesy of MAZDA MOTORS CORP.
Widen the stabilizer bushing opening 16-26 mm {0.7-1.0 in} and install the bushing to the front stabilizer as shown in the figure.

Fig 2: Installing Bushing To Front Stabilizer
Courtesy of MAZDA MOTORS CORP.