FixVault
Home › Mazda › 2007 › 6 Mazdaspeed › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Steering Gear And Linkage Assembly › Holder Assembly Note

Holder Assembly Note

  1. Apply grease to the U-gasket and O-ring.
  2. Assemble the U-gasket, backup ring and O-ring into the holder.
  3. Assemble the SST  to the steering rack.
    Fig 1: Assembling SST To Steering Rack
    G04326560Courtesy of MAZDA MOTORS CORP.
  4. Stake the holder to the cylinder using a punch.
    Fig 2: Staking Holder To Cylinder Using Punch
    G04326561Courtesy of MAZDA MOTORS CORP.
About FixVault