Flywheel Installation Note
CAUTION:
- Clean the crankshaft threads before tightening the bolts. The threads may be damaged if the bolts are tightened with any old sealant remaining.
- Clean the crankshaft thread holes.
- Install the flywheel to the crankshaft.
- Hand-tighten the new flywheel lock bolts.
- Install the SST to the flywheel.
- Gradually tighten the flywheel lock bolts in a crisscross pattern.
Tightening torque
151.3-161.1 N.m {15.3-16.4 kgf.m, 111.6-118.8 ft.lbf}