FixVault
Home › Mazda › 2007 › 6 s, 4D Hatchback, Automatic › Repair and Diagnosis (Single Page) › Body & Frame › Ignition Switch/Steering Lock › Power Systems › Fuse Block Removal/Installation

Fuse Block Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the left-side front side trim. (See FRONT SIDE TRIM REMOVAL/INSTALLATION. )
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: View Of Fuse Block
    G04327705Courtesy of MAZDA MOTORS CORP.
About FixVault