FixVault
Home › Mazda › 2007 › 6 s, 4D Hatchback, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Request Switch Removal/Installation › Trunk Lid

Trunk Lid

  1. Disconnect the negative battery cable.
  2. Remove the rear finisher. (See REAR FINISHER REMOVAL/INSTALLATION. )
  3. Remove the screws, then remove the request switch.
    Fig 1: Request Switch
    G04327346Courtesy of MAZDA MOTORS CORP.
About FixVault