FixVault

Interior, Rear

WARNING: This page is about a different car, the 2007 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  3. Remove the back trim. (See BACK TRIM REMOVAL/INSTALLATION .)
  4. Remove the nuts.
  5. Disconnect the connector, then remove the keyless antenna.
  6. Install in the reverse order of removal.
Fig 1: Identifying Keyless Antenna And Nut
G04931356Courtesy of MAZDA MOTORS CORP.