FixVault
Home › Mazda › 2007 › CX-7 Touring, AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Headlights › Lighting Systems › Auto Light Control Module Removal/Installation

Auto Light Control Module Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION ).
  3. Remove the instrument cluster. (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION ).
  4. Remove in the order indicated in the table.
    Fig 1: Identifying Auto Light Sensor Components
    G04861336Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
About FixVault