FixVault
Home › Mazda › 2007 › CX-7 Touring, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Inner Handle Removal/Installation

Inner Handle Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the front door trim or rear door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .) (See REAR DOOR TRIM REMOVAL/INSTALLATION ).
  3. Detach the cables from the inner handle and door lock knob.
  4. Install in the reverse order of removal.
    Fig 1: Identifying Inner Handle And Cables
    G04861122Courtesy of MAZDA MOTORS CORP.
About FixVault