FixVault
Home › Mazda › 2007 › CX-7 Touring, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Request Switch Removal/Installation[Advanced Keyless System] › Driver-side/passenger-side

Request Switch Removal/Installation[Advanced Keyless System]: Driver-side/passenger-side

  1. Disconnect the negative battery cable.
  2. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION ).
  3. Remove the front outer handle. (See FRONT OUTER HANDLE REMOVAL/INSTALLATION .)
  4. Remove the screws A, then remove the handle seat and plate.
  5. Remove screw B, then remove the request switch.
    Fig 1: Identifying Request Switch For Driver Side / Passenger Side
    G04861171Courtesy of MAZDA MOTORS CORP.
About FixVault