Rear Door Glass Removal/Installation

Fully lower the rear door glass.
Remove the rear beltline molding. (See REAR BELTLINE MOLDING REMOVAL/INSTALLATION ).
Remove the sail garnish. (See SAIL GARNISH REMOVAL/INSTALLATION ).
Remove the rear door garnish. (See REAR DOOR GARNISH REMOVAL/INSTALLATION ).
Adjust the door glass position as shown in the figure.
Disconnect the negative battery cable.
Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION ).

Fig 1: Identifying Rear Door Glass Adjustment Points
Courtesy of MAZDA MOTORS CORP.
Remove the bolts.

Fig 2: Rear Door Glass Bolt With Torque Specifications
Courtesy of MAZDA MOTORS CORP.
Remove the rear door glass guide and glass run channel as a single unit.

Fig 3: Identifying Rear Door Glass Guide And Glass Run Channel
Courtesy of MAZDA MOTORS CORP.
Remove the hole cover.
Remove the bolt
Lift the rear door glass up and remove it in the direction of the arrow.
Install in the reverse order of removal.

Fig 4: Rear Door Glass Bolt With Torque Specifications
Courtesy of MAZDA MOTORS CORP.