Data Monitoring And Recording Procedure: Notes

Connect the M-MDS or equivalent to the DLC-2 (16-pin).
After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (notebook PC)
- Select the "Toolbox" tab.
- Select "DataLogger".
- Select "Module".
- Select "HEC".
When using the PDS (pocket PC)
- Select "Module Tests".
- Select "HEC".
- Select "DataLogger".
  
  Fig 1: Identifying DLC-2 Connector
  Courtesy of MAZDA MOTORS CORP.
Verify the data monitor items.