FixVault
Home › Mazda › 2007 › CX-7 Touring, AWD › Repair and Diagnosis › Engine Performance › Tune-Up › Ignition System › Ignition Coil Removal/Installation

Ignition Coil Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the charge air cooler. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION ).
  3. Remove in the order indicated in the table.
  4. Install in the reverse order of removal.
    Fig 1: Ignition Coil And Connector With Torque Specifications
    G04859744Courtesy of MAZDA MOTORS CORP.
About FixVault