FixVault
Home › Mazda › 2007 › CX-9 Sport, 3.5 C, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Inner Handle Removal/Installation › Front

Inner Handle Removal/Installation: Front

  1. Disconnect the negative battery cable.
  2. Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION .)
  3. Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
  4. Disconnect the door lock switch connector.
  5. Detach the cables from the inner handle and door lock knob.
  6. Install in the reverse order of removal.
    Fig 1: Identifying Inner Handle, Cables And Connector
    G04971250Courtesy of MAZDA MOTORS CORP.
About FixVault