FixVault
Home › Mazda › 2007 › CX-9 Sport, 3.5 C, AWD › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System › Request Switch Removal/Installation [Advanced Keyless System] › Driver Side/Passenger Side

Driver Side/Passenger Side

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
    2. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
    3. Front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION .)
    4. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION .)
    5. Front door module (See FRONT DOOR MODULE REMOVAL/INSTALLATION .)
  3. Remove the screw A, then remove the handle seat.
  4. Remove screw B, then remove the request switch.
    Fig 1: Identifying Request Switch And Handle Seat (Driver Side/Passenger Side)
    G04971325Courtesy of MAZDA MOTORS CORP.
About FixVault