FixVault
Home › Mazda › 2007 › CX-9 Sport, 3.5 C, AWD › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System/Roll Stability Control System › DSC/RSC HU/Cm Removal/Installation › Brake Pipe Removal Note

Brake Pipe Removal Note

  1. Place an alignment mark on the brake pipe and DSC/RSC HU/CM.
  2. Apply protective tape to the DSC/RSC HU/CM connector to prevent brake fluid from entering.
  3. Remove the brake pipe.
    Fig 1: Placing Alignment Mark On Brake Pipe And DSC/RSC HU/CM
    G04970209Courtesy of MAZDA MOTORS CORP.
About FixVault