FixVault
Home › Mazda › 2007 › CX-9 Sport, 3.5 C, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (MZI-3.5) › Camshaft Position (CMP) Sensor Inspection › Resistance Inspection

Resistance Inspection

  1. Remove the CMP sensor connector.
  2. Measure the resistance between the CMP sensor terminals.
    • If not within the specification, replace the CMP sensor. (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION .)
    • If the monitor item status/specification (reference) is not within the specification, even though the resistance is within the specification, perform the "Circuit Open/Short Inspection".

    CMP sensor resistance 

    800-1,320 ohms 

About FixVault