FixVault
Home › Mazda › 2007 › CX-9 Sport, 3.5 C, AWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (MZI-3.5) › Pcm Inspection › PCM inspection preparation

PCM inspection preparation

  1. Disconnect the negative battery cable.
  2. Remove the battery and battery tray. (see BATTERY REMOVAL/INSTALLATION [MZI-3.5] .)
  3. Remove the windshield wiper arm and blade. (see WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
  4. Remove the cowl grille. (see COWL GRILLE REMOVAL/INSTALLATION .)
  5. Remove the windshield wiper motor. (see WINDSHIELD WASHER MOTOR REMOVAL/INSTALLATION .)
  6. Remove the cowl panel. (see COWL PANEL REMOVAL/INSTALLATION .)
  7. Remove the PCM connector still connected.
  8. Install the battery and battery tray. (see BATTERY REMOVAL/INSTALLATION [MZI-3.5] .)
  9. Connect the negative battery cable.
About FixVault