FixVault
Home › Mazda › 2007 › CX-9 Touring, 3.5 C, FWD › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Power Systems › Ignition Switch Removal/Installation

Ignition Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the column cover. (see COLUMN COVER REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Identifying Ignition Switch, Connector And Screw
    G04971674
  4. Install in the reverse order of removal.
About FixVault