Two-step Down Function Inspection
- The distance the door glass opens can be changed using the two-step down function (approx. 20-100 mm {0.79-3.93 in})
.
- The two-step down function can be made inoperative. (The function is operative at the initial setting.)
- The two-step down function does not function during IG OFF timer.
NOTE:
- Perform the following inspection for the power window main switch and the power window subswitches for each front window.
TWO-STEP DOWN FUNCTION INSPECTION
| STEP |
INSPECTION |
ACTION |
| 1 |
- Turn the ignition switch to the ON position.
- Raise door glass completely.
- When the door glass is lowered using manual mode, does it move down to approx. 30 mm {1.2 in}
from the completely closed position and stop for 1 s
? (This inspection cannot be performed during IG OFF timer function operation.)
|
Yes |
- Two-step down function is normal.
- Reinspect malfunction symptoms.
|
| No |
- Perform the power window initial setting procedure and verify auto-up/down operation.(See
POWER WINDOW INITIALIZATION PROCEDURE
.)
- If the automatic function does not operate, go to Automatic Door Glass Return Function Inspection.
- If the automatic function operates but the two-step down function does not, replace the power window switch.
|