FixVault
Home › Mazda › 2007 › CX-9 Touring, 3.5 C, FWD › Repair and Diagnosis › Brakes › Traction Control › Dynamic Stability Control System/Roll Stability Control System › DSC/RSC HU/Cm Inspection › Notes

DSC/RSC HU/Cm Inspection: Notes

  1. Disconnect the DSC/RSC HU/CM connector. (See DSC/RSC HU/CM REMOVAL/INSTALLATION .)
  2. Connect the negative battery cable. (see BATTERY REMOVAL/INSTALLATION [MZI-3.5] .)
  3. Attach the tester lead to the DSC/RSC HU/CM harness side connector, then inspect voltage, continuity or resistance according to the standard (reference value) on the table.
About FixVault