DTC B1013: Notes
DTC B1013 DETECTION CONDITION AND POSSIBLE CAUSE
| DTC B1013 |
Seat weight sensor calibration error |
| DETECTION CONDITION |
WARNING:
- Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
- Calibration set value not within valid range.
|
| POSSIBLE CAUSE |
- Weight acting on front passenger-side seat during calibration
- Improperly installed front passenger-side seat part at time of calibration
- Deformed floor where attached to front passenger-side seat
- Deformed front passenger-side seat under-bracket or frame
- Seat weight sensor deformed or malfunction
- Seat weight sensor control module malfunction
- SAS control module malfunction
- Load to or deformation of the seat belt rail
|