Coil Antenna Removal/Installation[Keyless Entry System]

NOTE:

• Do not remove the coil antenna unless you are replacing it.

1. Disconnect the negative battery cable.
2. Remove the following parts:
   1. Hood release lever (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION[ADVANCED KEYLESS SYSTEM] .)
   2. Scuff plate (Driver's side) (See SCUFF PLATE REMOVAL/INSTALLATION .)
   3. Front side trim (Driver's side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
   4. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
   5. Column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
3. Disconnect the coil antenna connector.
4. Detach the steering lock tabs from the holes on the coil antenna.
5. Install in the reverse order of removal.

Fig 1: Removal/Installation Of Coil Antenna

Courtesy of MAZDA MOTORS CORP.