FixVault
Home › Mazda › 2008 › 5 Grand Touring, 2.3 L › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System (L3) › Camshaft Position (CMP) Sensor Inspection [L3] › Visual Inspection

Visual Inspection

  1. Remove the battery cover.
  2. Disconnect the negative battery cable.
  3. Remove the plug hole plate.
  4. Disconnect the CMP sensor connector.
  5. Remove the CMP sensor.
  6. Verify that there are no metal shavings on the CMP sensor.
    • If there is a malfunction, replace the CMP sensor.
About FixVault