FixVault

Circuit Open/Short Inspection: Notes

WARNING: This page is about a different car, the 2008 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the PCM connectors.
  2. Disconnect the MAF/IAT sensor connector.
  3. Inspect the following wiring harnesses for open or short circuit. (Continuity inspection)
    Fig 1: Identifying MAF/IAT Sensor & PCM Wiring Harness Side Connector Terminals
    G04563009Courtesy of MAZDA MOTORS CORP.