FixVault
Home › Mazda › 2008 › CX-7 Touring, 2.3 L, AWD › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Power Systems › Ignition Switch Removal/Installation

Ignition Switch Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION ).
  3. Remove in the order indicated in the illustration.
    Fig 1: Identifying Removal Order Of Ignition Switch Components
    G04861433Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault