FixVault
Home › Mazda › 2008 › MX-5 Miata SV › Repair and Diagnosis › Body & Frame › Door Locks › Security System And Locks System (Advanced Keyless System) › Keyless Antenna Removal/Installation[Advanced Keyless System] › Interior, Front

Interior, Front

  1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  2. Remove the scuff plate. (See SCUFF PLATE REMOVAL/INSTALLATION .)
  3. Remove the side panel. (See SIDE PANEL REMOVAL/INSTALLATION .)
  4. Partially peel back the floor covering so that the foot support can be removed.
  5. Remove the foot support.
  6. Disconnect the connector, then remove the screws.
  7. Remove the keyless antenna.
    Fig 1: Identifying Keyless Antenna & Foot Support
    G04931354Courtesy of MAZDA MOTORS CORP.
  8. Install in the reverse order of removal.
About FixVault